Volvo Penta TAMD 75 EDC 480HP MAGNUM EVO-Tech Heavy Duty Performance Chip (2024)

Description

If your primary goal is to Ramp up your Volvo Penta TAMD 75 EDC 480HP’s Horsepower Output that are in the position to efficiently and instantly trick the slack, factory engine Performance Potential setting, Do Not Be Reluctant to wire up our ECM Tuning easily speedily. Elevate your vehicle’s Horsepower and say bye to the lean fuel injection settings with Our firm‘s unbeatable EVO-Tech ECM Tuning that will re-program the Powertrain Control Module’s fuel programming to release your Volvo Penta TAMD 75 EDC 480HP’s full Horsepower. It is wired up inline with the signal return wire of the Intake Air Temp sensor (also referred to as MAT or IAT) that can be a standalone sensor or implemented within the combinated Air Fuel Meter also called (MAF, TMAP, etc.) unit. The Engine Computer Chip is connected to the Exhaust Gas Oxygen Sensor’s harness too, to overwrite the limitations that is employed by your motor’s Engine Management that would stop the fuel injection settings re-adjustment from going through. FOR CORRECT FITMENT PLEASE UNDERSTAND IT IS VERY IMPORTANT TO DOWNLOAD THE HIGH NOTES AND TIPS PDF ABOUT YOUR Volvo Penta TAMD 75 EDC 480HP Remap Chip.

Our ECU Chip is designed hoax the signal of some motor sensors sent to the ECM, to commit an optimizing adjustment to the fuel map settings and to cause your Volvo Penta TAMD 75 EDC 480HP’s motor to produce more Performance Potential, furthermore to improve the engine response; and the kick-out time. Scrap the slack stock fuel map programming and deploy our ECU Chip that will unquestionably deliver vast right-to-the-wheels horsepower increase, even on altered engines.

This salient Magnum Engine Computer Tuner will efficiently dupe the Electronic Control Module’s fuel trim to make the Engine Computer think that the Intake Air Temperature is lower, to allow it to set a lower Air Fuel Ratio that means more fuel for the mixture, in addition on motors fitted with exhaust Oxygen Sensor it will monitor exhaust gas by emissions-control system. The Five Star Quality Part will trick the barriers implemented by the ECU to unlock your Volvo Penta TAMD 75 EDC 480HP’s usable HP Potential. Have you ever heard? The addend engine Performance that is accomplished by EVO-Tech Fuel Management Chip will allow your motor to operate with more mean engine gas mileage. The increased torque and HP Output gains across the rev range supplied by this Remap Tunes guarantees that you won't have to use as much throttle to take off and maintain a certain speed. The economy increase’s rate majorly depends on your riding manner. Magnum GO-Green Program enables you to profit from the fuel map software’s recalibrating, besides it gives you the ability to act something against Global Warming. Discover more info about Magnum GO-Green Program .

If you want to harness your Volvo Penta TAMD 75 EDC 480HP‘s full potential and can commit some electrical wiring with a little experience about electronics Do Not Be Reluctant to hook up our Exclusive Quality programmable Engine Computer Tuner It will Crank Up the Power Potential on your vehicle, in haste. Within an hour, Our company’s ECM chip perfectly remaps your power plant’s fuel curve for the most Performance Capability. Our Remap Tool is not uncomplicated to install. You can hook up and dial it in quickly then you’ll receive the horsepower gain in your garage whil you don’t need to go to an installer and pay bucks the installation. EVO-Tech can be efficiently used in your machine.

On modernElectronic Fuel Injected gas and Common-Rail diesel high-powerengines you certainly can't to modify the AFR with re-jetting to produce addend active HP Potential as you could on old carbureted engines. EVO-Tech Race Tuner Kit's primary reason to be fitted is to make this adjustment to Bump Up your engine’s HP Output through trouble-free DIY setup.

Specs

Claims

• 15% extra Horsepower and Torque
• 22% faster acceleration throughout the RPM range
• 6% fuel mileage improvement
• Higher top end speed (until redline limit)
• Improved throttle response w/o flat spots

Features

• Hassle-free installation
• You can go back to factory settings
• 10-year warranty
• Full adjustability w/ Remote Control
• In-built oxygen sensor control (for emission controlled models only)
• Waterproof design (not submersible)

Taps into

• Intake Air Temp and Oxygen Sensor (if any)
• Ignition key activated +/- 12V power feed

Required skill

• Minimum electrical and mechanical skill

Packing List

• 1 x Fuel Controller Module
• 1 x Remote Control
• 1 x RS-232 Remote Cable 6 feet- 1.8m
• 2 x Bullet Connector
• 2 x Scotch Lock
• 2 x Retaining Bolt
• 2 x Self Locking Nut
• 1 x Installation Instructions

• EVO-Tech performance chip installs quickly. Adjustment takes 30 minutes and your engine can be returned to its factory settings in about 2 seconds.
• You'll be able to modify your vehicle’s air/fuel ratios.
• This performance chip is intended to remap the factory fuel trim restricted hence multiple requirements manufacturers have to comply with nowadays.
• It fouls signals being read by the Electronic Engine Management, resulting an adjustment to the fuel curve, which is what causes the increase in HP, as well as improves acceleration and throttle response throughout the RPM range.
• Sudden shoot out, much more horsepower and torque and fine throttle response coupled with improved fuel efficiency.
• Installation is easy, no special tools or expertise required.
• Gain 15% additional horsepower, 15% torque combined with explosive acceleration.

EVO-Tech performance chips have dyno-proven results for producing more power for your vehicle.

• This fuel controller will not affect engine reliability or durability. EVO-Tech fuel controller is designed to trick the ECU thinking the intake air much more cooler, then the ECU will send more fuel for a richer mix besides it blocks restrictions developed by the ECU on those engines, exhaust gas consistency is monitored by emissions-control through exhaust oxygen sensor or sensors. Longer RS-232 extension cable available for the remote control.
• EVO-Tech vehicle specific fuel controllers are sorted into numerous categories according to the operating range and type of IAT / MAF / MAP and oxygen (if any) sensor. EVO-Tech is available to all utility vehicle engines controlled by electronic engine management (ECU, ECM).
• Our EVO-Tech performance chip will bring your vehicle’s performance even one step higher. Check out the specs and keep in mind, the module you will receive have been specifically designed to fit to your exact engine. EVO-Tech performance chip is known to get more power out of engines. Our team of customer service specialists are standing by to answer all of your questions or concerns.

On oxygen sensor models fitted with aftermarket exhaust or decat, Check Engine Light (CEL, FI) is triggered therefore you need to wire up an oxygen sensor simulator in order to cancel ECU safe / limp mode. Signals fouled by EVO-Tech will be ignored by the ECU until CEL issue is resolved definitely. If top end speed is limited by factory speed governor or you are about to override the factory red line RPM limit check out our Rev Limiter.

• Though fuel controllers basically are designed to gain more performance and not especially to improve the economy, EVO-Tech fuel controller does reduce the fuel consumption in case of normal, everyday riding manner. Modification of the air fuel ratio - slightly at the expense of other factors as emission, etc., - results in increased combustion efficiency and fuel saving accordingly. The typical economy improvement is 6%.
• As a reliable market leader brand Magnum Tuning has been dealing with manufacture of performance upgrades since 1994. Magnum experience warrants peak performance, reliability perfect style.

Claims stated in this description are warranted by Magnum Tuning.